Wood chisels, mirror-bright.

Wood chisel sharpening service.

Bench chisels, mortise chisels, paring chisels and carving gouges. Flat back lapped, primary bevel ground square, micro-bevel polished to a hair-shaving edge. Cabinetmakers, joiners, instrument-makers and woodworking schools across Australia.

From $10
Per chisel
Mail-in
Australia-wide
7 to 11
Business days
Knife sharpening on a whetstone with a leather strop beside the stone
Transparent Pricing

Per chisel,lapped and polished.

Bench chisel (6–25mm)

Standard cabinetmaker bench chisels

$10/chisel+ GST

Wide bench chisel (32mm+)

Wide-blade paring and trimming chisels

$14/chisel+ GST

Mortise chisel

Heavy mortise chisels with thick blades

$14/chisel+ GST

Carving gouge / V-tool

Curved gouges and V-parting tools, inside and outside ground

$16/tool+ GST

Damaged or pitted back

Heavy regrinding to true the back (quoted)

Quoted

Indicative starting prices, exclusive of GST. Final quote confirmed when your gear arrives. Bulk and trade discounts available.

Flat back. Primary bevel. Micro-bevel polish.

A good chisel does three things its owner can never quite reproduce at home: the back is flat across its full length, the primary bevel is square to the back, and the cutting edge is polished to mirror brightness. All three matter: without all three a chisel pares ragged.

We lap the back flat on a precision diamond plate, hollow-grind the primary bevel at the chisel's design angle (25° for paring chisels, 30° for bench, 35° for mortise), then polish a micro-bevel on progressively finer waterstones up to 8000 grit. Carving gouges have inside and outside ground separately on slipstones shaped to the sweep.

  • Back flat-lapped on diamond
  • Primary bevel at design angle
  • Micro-bevel polished to 8000 grit
Hands sharpening a chef knife on a whetstone with a sharpening guide
More from the workshop

One workshop,every kind of edge.

FAQs

Chisel Sharpening FAQs

Common questions from cabinetmakers, joiners and woodworkers.

How much does chisel sharpening cost in Australia?
Standard bench chisels (6–25mm) from $10. Wide bench chisels (32mm+) and mortise chisels from $14. Carving gouges and V-tools from $16 (priced per profile). All prices are plus GST. Heavy back-flattening on pitted or rusted chisels is quoted per chisel after we inspect them.
Do you sharpen Japanese chisels (oire-nomi)?
Yes. Japanese laminated chisels are flat-lapped on the back (the hollow / ura is preserved), primary bevel ground at the original angle, and finished on Japanese natural or synthetic finishing stones up to 8000 grit. Hammer-cap setting is checked if the handle has loosened.
Will sharpening change my chisel's angle?
No, the primary bevel is ground at the original design angle. If you want a different angle (steeper for harder timbers, shallower for paring), tell us in the order notes and we'll grind to your spec.
Can you fix a rolled or chipped edge?
Yes. Small chips and edge-rolls are ground out as part of a normal sharpen. Heavy damage (3mm+ of broken edge) requires regrinding the primary bevel further back into fresh steel. Quoted per chisel.
How long does sharpening take?
Total turnaround is 7 to 11 business days. Workshops and woodworking schools often send full sets at once.
What angle should a chisel be sharpened at?
25 degrees on the primary bevel suits most bench chisels, often with a slightly steeper 30 degree micro-bevel for a stronger edge. Paring chisels for soft timber can go lower, while mortise chisels and chisels for hardwood are often finished steeper, around 30 to 35 degrees at the edge. We grind to the chisel's original design angle unless you ask for a different one in the order notes.
Can you sharpen a chisel with a grinder?
Yes, but carefully. A bench grinder is fine for reshaping the primary bevel, but a dry wheel quickly overheats the thin edge, and once the steel turns blue it has lost its temper and won't hold an edge. Use light passes, dip it in water often, then finish on stones. We hollow-grind the bevel and polish the edge on waterstones up to 8000 grit.
How should I post wood chisels?
Wrap each chisel in cardboard with the edge protected. A cardboard tube or rigid box is ideal for a set; padded satchel works for 1–3 chisels. Never just bubble wrap. The edges punch through it in transit.
Knife sharpening on a whetstone with a leather strop beside the stone

Send Your Chisel Roll In.

Turnaround is 7 to 11 business days. Cabinetmakers and woodworking schools: bulk pricing on 10+ chisels.

Post to PO Box 69, Gunning NSW 2581. Send with Australia Post. Couriers can't deliver to a PO Box.

Start My Order